About kcuerrier_FTNT

kcuerrier_FTNT · 02-01-2021

FSSO uses several methods to determine if a users IP address has changed or is still in use. All rely on your AD playing well.The likely suspect here is that your local DNS is not being updated correctly, and the server where the collector agent is i...

kcuerrier_FTNT · 11-09-2016

Hello, The Source IP cannot be modified for Health Check instances.The Firmware automatically assumes that there is no routing issue between the Firewall, load balancer and the back end physical server. In this case where you are using the FortiGate ...

kcuerrier_FTNT · 03-16-2016

Yes,Any port on the 60D can be used for LAN/WAN/DMZ functions.Depending on the firmware version currently on your unit will depend on the process required.Ultimately, you will need to remove the specific port from the LAN switch configuration.If you ...

User Statistics

User Activity

Re: FSSO and ip addresses that change

Re: Specify source IP for load-balance health check

Re: Which Forums Posts would you recommend for the Fortinet Knowledge Base?

KCS

Fortinet Training Institute