I would like to apply web and other traffic shaping rules for traffic
that is coming from 100 sites behind FG 50B boxes and possibly route all
of it through the main FG 200B unit at HQ. Is it a good idea to route
all Internet traffic from around 100 ...
I found this in the FortiOS Handbook: IPsec VPN manual: In the example
configuration, the protected networks 10.1.0.0/24, 10.1.1.0/24 and
10.1.2.0/24 are all part of the larger subnet 10.1.0.0/16. The steps for
setting up the example hub-and-spoke co...
With regards to the flaw in design you mentioned, is that just a gut
feeling or you can positively say it will cause problems and cannot be
configured thusly? It would maybe be easier to change the subnet of the
remote locations to 10.0.0.0/8 for exa...
The post with which I started the thread is scarce on information and
not very concise, since I was at my wits end and tired. So here goes
some more information. This is how the static routes look like on the
Spoke FG 50B Units. Currently the default...
