Hello! I have an odd problem with L2TP server over IPSEC on my FG-100F
box running 7.4.6 software.My configuration:config vpn ipsec
phase1-interface edit "L2TP-VOLZ" set type dynamic set interface
"VLAN96-TESTLAB" set ike-version 2 set peertype any s...
Hello!In my network I have a separate VRF 20, and I need to push traffic
from certain users in it. VRF 20 has connectivity to internet via
interface vlan96-14: gw (root) # show system interface vlan96-14 config
system interface edit "vlan96-14" set v...
@funkylicious wrote:hi,try configuring 10.100.251.1/32 address on
l2t.TESTLAB interface and 10.100.251.2/24 as the remote.Thank you. It
helped.So now I should add l2t.TESTLAB interface to OSPF as
point-to-multipoint in order to get it working? It som...
The situation is the same with software vlinks.What I've got from
further debugging. There is correct route to 9.9.9.9: gw (root) # get
router info routing-table details 9.9.9.9 Routing table for VRF=0
Routing entry for 9.9.9.9/32 Known via "static",...
Hello @lgupta,thank you for reply. I've got your point. The difficulty
is that I have default route in VRF 0 pointing to SD-WAN interface, thus
I cannot add one more pointing to VRF 20 because "You cannot have
duplicated routes on SD-WAN and non-SD-W...
