Hi everyone,I’m planning to upgrade a FortiGate 101F currently running
FortiOS 7.0.8 to a newer 7.x version (likely 7.2 or 7.4).My client is a
bit concerned about the BGP stability after the upgrade, since the
FortiGate is currently handling BGP rout...
Hi, I have an issue with IGMP snooping.After configuring IGMP snooping
on a FortiSwitch Standalone running version 7.2, I’m still experiencing
problems with one port. Here’s the situation: Port 3: TXPort 5: RXPort
7: TX What happens is that many devi...
Hi everyone, after upgrading my FortiGate 91G from FortiOS 7.0.16 to
7.2.10, the SSL VPN interface (ssl.root) disappeared from Network >
Interfaces in the GUI. However:•The SSL VPN works normally and users are
able to connect.•From CLI, the ssl.root ...
fortigate in headquarter and switch and fortiap in the branch office
connected in VPN is it possible to connect them to the fortigate? Are
they managed by the fortigate? can I address them at the IP level? how
do I do it? keep in mind that the VPN ba...
Hi everyone,I am writing to ask for advice regarding a configuration I
am facing for a customer. The current situation is as follows:The client
has 13 stores and one headquarters. Each store is connected via IPsec
VPN to the headquarters via a Mikrot...
The client’s main concern is that the BGP might stop working and fail to
restart after the update, considering that their firewall is running an
older firmware version , which is quite dated.So,Perfect, thank you.
I’ll try to convince my client to pr...
Hi Guys!!! Now I manage the fortiswtich in Layer 3 mode from the office,
but since I took charge of the fortiswitch from the office the
fortiswitch ports no longer communicate.what can I do? I need to
communicate via the ports to the mikrotik router ...
HI,Thank you very much for your reply. Yes, your hypothesis
"site-to-site ipsec tunnel connecting fortigate HQ to remote
router/branch" is correctso at this point I can reach all my devices
from the office.What I don't understand is how to address my...
