I have other ipsec tunnels on the same physical interface on FG600C.
When I " diag sniffer packet tunnel none 1" I can see rcv/tmt packets
fine on all tunnels except this one. I only see outgoing packets. I have
a linux client where I can successfull...
Not sure what is going on. It shouldn' t, should it? Unless you SPECIFY
the proxy maybe? I see the forticlient connect to the proxy, and pass a
lot of data, but several seconds into the connection, it disconnects and
then connects out the default gat...
I am able to login SSL VPN successfully from most anything, win7 esp. as
" this user." When " this user" logs in from an XP, he gets an " unable
to login tot he server. Your login credentials not be configured
properly for this connection. (-12) [sic...
Mostly newbie here... I have a user who seems unable to maintain SSL VPN
login with his MAC. I have probably 100 other users who have no problem.
Looking at the log, he is able to login using safari, but 10, 20 seconds
later it logs out. The Fortissl...
I have an IPSEC tunnel which I am Destination NATing. Source address in
tunnel is 10.1.1.0/25. Destination address is spec' d as ALL. My VIP NAT
table successfully maps Destination IP 68.153.79.X received from the
IPSEC tunnel to Dest IP 192.168.128....
When the VPN SSL clients are on a corporate network, everybody has to go
thru a proxy, and indeed, the SYNs to any port 80 on a device at far end
of the tunnel are SYN/ACKed by the proxy while he continues the SYN
downstream. And the proxy is encount...
Thanks, I have done a traceroute to a point at the end of the tunnel.
Nothing, but 3 TTL packets come back that are OUTSIDE of the network
defined for the tunnel. I won' t route them and the client doesn' t see
them of course. So this does sound susp...
I did some wiresharking today. Forticlient tests connections DIRECT via
the Internet and thru a proxy (using domain authentication) spec' d in "
internet options" or browser settings. They both work,and Forticlient
keeps them both open, but seems to ...
Thanks. Other user does not work on his PC. Might be ATT global connect
VPN client - I have had to disable/turn firewall off on at least ONE PC
to get forti to work, tho that was Win7. Too many things to pursue and
learn. JOhn
