HI, I have experienced a very interesting problem.I had a network device
that was working fine when connected to using a computer or when
connected via the FortiGate, however, when connecting via the
FortiSwitch it would not work and the FortiSwitch ...
Hi community! I have the following network:I have control over FortiGate
1 and 2 but the routers (Cisco) belong to my customer.I have a BGP
peering between FG1 and R1 and between FG2 and R2. There is no BGP
peering between FG1/2 and the remote sites ...
Hi i have kind of an unusual situation where i need to replace private
asn to public asn but keep the asn prepend. I have 3 FortiGate
firewalls, FG11. FG2, and FG3.I have a BGP between FG1 and FG2, and
between FG1 and FG3.fg1 asn is set to 1111 (Publ...
My company hired a 3rd party company to manufacture a device for us so
it's something custom.A hint to explain (maybe) what happened is the MAC
address that didn't work over the FortiSwitch started with A3 (10100011
(binary))So a multicast and a loca...
Thank you for your reply @Toshi_Esumi 1. Between R1/R2 and the remote
sites there is an MPLS network2. That's correct - they have different
ASNs3. I will have a link monitor from FG1/2 monitoring the northbound
connection and if it goes down it will ...
@Toshi_Esumi thank you so much!I was able to get to work using the
following settings:FG1:FortiGate-VM64-KVM # config router
bgpFortiGate-VM64-KVM (bgp) # showconfig router bgpset as 1111set
router-id 10.0.1.1set graceful-restart enableconfig neighbo...
