Hi all,Do I need to configure/enable ECMP for OSPF or does it work by
default? I know that it needs to be enabled for BGP.I have the below
scenario with OSPF between all 4 firewalls.Currently using statics for 3
to get to 4 and 4 to 3, as there are 2...
Hi All, We have FortiGate 1101E (6.4.13) and FortiGate 600F (v7.0.12),
connected via a dark fibre (10 gig).Before it was all switches with dark
fibre and the firewalls will only inspect the Internet traffic, but now
the firewalls take care of the rou...
Toshi_Esumi thank you for your reply.For router 3 path 3-1-4 equals path
3-2-4 andfor router 4, 4-1-3 and 4-2-3 are equal, so they will appear in
the routing table. Currently using statics with link monitor, but I do
not like statics and would be nic...
Hi AEK, @AEK - I cannot ask the guy again as he was a consultant when I
worked for a different company. I think it was more about firewall
limitations, as I told him about the policies and that there is no
inspections, flow-based, etcThanks
Hi AEK, Thanks for taking the time to reply. Yes, what you are
suggesting is a good solution for one site or campus, but in my case I
have 3 separate site locations, 3 different towns.Yes, we have dark
fibre between them but I will be compromising on...
