Hello all, I have a question.We have a vpn site to site.But I want to
mask the external side with a different ip range. for example :
192.168.1.0 --> 10.10.10.0 I only have access to the webinterface of our
fortigate 110c.How can I do this.I already ...
Hello all, I have a situation Site Asubet 192.168.100.x/24subnet
10.80.14.x/24 Site B Subnet 192.168.100.x/24 traffic will only be
initiated from site A --> 10.80.14.x The vpn is up and running, but we
want to NAT from site A to B.If a user from site...
There is one thing to keep in mind. I can't change any settings in the
cisco. The only thing I want to translate is 192.168.100.6 to
10.80.255.254. I made a policy rule which nat 192.168.100.6 to
10.80.255.254 (from vpn to internal) this works as I c...
There is one thing to keep in mind. I can't change any settings in the
cisco.The only thing I want to translate is 192.168.100.6 to
10.80.255.254.I made a policy rule which nat 192.168.100.6 to
10.80.255.254 (from vpn to internal) this works as I can...
Site B is a cisco device. I was thinking about VIP. we only use
192.168.100.6 in site B. That's why we only want 1 adres in Site A to
nat to. The problem is: This fortigate 110C on site A is a shared
environment. So I can only use the webinterface. C...
