Hello, Recently acquired a FS 108E-POE. I factory reset the switch to
ensure I was starting from scratch. I connected it to my Fortigate 70f
through a dedicated fortilink port. The fortigate detects the switch, I
was able to register the switch, but ...
I was able to delete the other Fortilink interface and now that error is
no longer present: execute switch-controller diagnose-connection
S108EP5920004250Fortilink interface ... OKfortilink enabledDHCP server
... OKfortilink enabledNTP server ... OKf...
FortiOS - FortiGate-70F v7.0.15,build0632,240401 (GA.M) - I downgraded
from 7.2.8 for troubleshooting purposes ( Obviously it did not
work)FortiswitchOS - FortiSwitch-108E-POE v6.2.3,build0202,191223 (GA)
Yes, there is a second interface labeled "Fortilink", but it is disabled
and there are no ports assigned to that interface. I am unable to delete
it because there are references tied to it. That shouldn't be causing
this issue though, right?
Hi @Adolfo_Z_H , In my original post, there was an error for NTP, and
then right below that error, NTP was "OK". I ensured that Security
Fabric was enabled on the Fortilink port and default VLAN for Fortilink,
and now it is showing NTP Server OK: For...
