Description
This article describes how to configure an Access Control List (ACL) in FortiManager.
Scope
FortiManager, all platforms, all versions.
Solution
This document outlines the configuration steps required to configure an ACL in FortiManager.
Since ACL configuration is part of the policy package, configuration made in Device Manager will be deleted when installing the policy package unless Import Policy is performed from Device Manager.
To enable the ACL feature, select Tools -> Feature Visibility under Policy & Objects:
Then ACL can be configured under:
Policy & Objects -> Policy Packages -> [package_name] -> CLI Configurations -> Firewall -> ACL.
- Enter the necessary parameters such as comments, action (allow or deny), service type, source addresses, etc. Save the ACL configuration.
- Install the policy package:
- FortiManager can only install one policy package at a time.
- Navigate to Policy & Objects"-> Policy Package.
- Select the desired policy package.
- Select Wizard.
- Choose the installation targets (e.g., FortiGate).
- Review the configuration in the Install Preview Log.
- Confirm the installation by selecting Install.
