FortiGate Next Generation Firewall utilizes purpose-built security processors and threat intelligence security services from FortiGuard labs to deliver top-rated protection and high performance, including encrypted traffic.
This article describes the steps to resolve BGP SNMP polling issues on FortiGate devices. The issue is caused by the FortiGate using a non-standard OID for the local AS value, which can be resolved by disabling the 'append-index' option in the SNMP configuration.
Scope
FortiGate.
Solution
To resolve the BGP SNMP polling issue on FortiGate, follow these steps:
Log in to the FortiGate device using the CLI.
Enter the following command to disable the 'append-index' option:
config system snmp sysinfo set status enable" set append-index disable end
Before disabling the 'append- index' option:
snmpget -v3 -l authPriv -u librenms -a SHA -A "XXXXXXXX" -x AES -X "YYYYYYYYYY" 10.252.2.6 1.3.6.1.2.1.15.2.0 iso.3.6.1.2.1.15.2.0 = No Such Instance currently exists at this OID
After disabling the 'append-index' option, the BGP SNMP polling should work correctly.
snmpget -v3 -l authPriv -u librenms -a SHA -A "XXXXXXXX" -x AES -X "YYYYYYYYYY" 10.252.2.6 1.3.6.1.2.1.15.2.0 iso.3.6.1.2.1.15.2.0 = INTEGER: 3924
If further issues are encountered, contact Fortinet Technical Support for assistance.
