Cybersecurity Forum

This forum is for all security enthusiasts to discuss Fortinet's latest & evolving technologies and to connect & network with peers in the cybersecurity hemisphere. Share and learn on a broad range of topics like best practices, use cases, integrations and more. For support specific questions/resources, please visit the Support Forum or the Knowledge Base.

TaiwAden
New Contributor

I have just gotten another internet and need to configure it to the existing one using the load bala

I have just gotten another internet and need to configure it to the existing one using the load bala
2 REPLIES 2
ss198939
New Contributor

1. assign ip add to wan1 of ist ISP.
2. add static route
3. add policy from internal to WAN1

same thing for 2nd

assign ip add to wan2 of 2nd isp
add static route
add policyy from internal to wan2.

this is the procedure as per me.

but here there is no load balance. so for load balance we have three choice, source ip based, weighted and spill over , and also add ping server to wan1 and wan2

YANOZein

hello.

i just add something about these config. To permit all if two lines working in your network, you must put the same disance route. For ewample 1 to route WAN1 et 1 to route WAN2

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.