Skip to main content
calamar
New Member
September 9, 2018
Question

Problem with performance FWF-60D

  • September 9, 2018
  • 8 replies
  • 8379 views

Hi, I have a FWF-60D, firmware 6.0.2 with a FTTH 600Mb/600Mb, the problem is bandwidth through it. I did a test on website speedtest.net and result is 160Mb/140MB more o less. Does it have a limit on wan port? I have configured it pppoe. Thanks a lot!!!

    8 replies

    Markus
    New Member
    September 10, 2018

    Hi and welcome to the Forums Here https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiGate_FortiWiFi_60D_Series.pdf you find the Data Sheet for 60D. If you just do firewalling, the Box should made 1.5 Gb/s. But if you want to use NGFW, you maybe need a bigger box. As i know, there are (default) no limitations an the Wan Ports. Best

    M

    calamar
    calamarAuthor
    New Member
    September 10, 2018

    Thanks for your reply.

    I do not understand that because firewall Throughput is 1.5 GB and my wan connection is 600mb. ¿how can I test it only firewall mode? thanks

    Markus
    New Member
    September 10, 2018

    You can test it with a policy from LAN --> WAN without any UTM (IPS/Webfilter/AV) feautures enabled.

    Thought Leadership Security Summit. Outpace New Threats with AI - enhanced defense. Tuesday, Septmeber 15, 8:30 AM - 2:30 PM PT. The Golf Club at Newcastle, WA.
    Virtual event | September 2026. SASE summit. The age of autonomous trust. Register here!