Staff & Editor

Technical Tip: Using the tree command to display the command tree

Forum|Forum|9 years ago
May 5, 2017
0 replies
3613 views

Description

This article explains how to display the command tree for a configuration section.

Scope

FortiGate.

Solution

To see the full command options for the DHCP server part, navigate to the DHCP server config section and enter the command:

config system dhcp server

tree

-- [server] --*id (0,4294967295)

|- status

            |- lease-time (0,4294967295)
            |- mac-acl-default-action
            |- forticlient-on-net-status
            |- dns-service
            |- dns-server1
            |- dns-server2
            |- dns-server3
            |- wifi-ac1
            |- wifi-ac2
            |- wifi-ac3
            |- ntp-service
            |- ntp-server1
            |- ntp-server2
            |- ntp-server3
            |- domain (36)
            |- wins-server1
            |- wins-server2
            |- default-gateway
            |- next-server
            |- netmask
            |- interface (16)
            |- [ip-range] --*id (0,4294967295)
                          |- start-ip
                          +- end-ip
            |- timezone-option
            |- timezone
            |- tftp-server (64)
            |- filename (128)
            |- [options] --*id (0,4294967295)
                         |- code (0,4294967295)
                         |- type
                         |- value (313)
                         +- ip
            |- server-type
            |- ip-mode
            |- conflicted-ip-timeout (0,4294967295)
            |- ipsec-lease-hold (0,4294967295)
            |- auto-configuration
            |- ddns-update
            |- ddns-update-override
            |- ddns-server-ip
            |- ddns-zone (65)
            |- ddns-auth
            |- ddns-keyname (65)
            |- ddns-key
            |- ddns-ttl (60,86400)
            |- vci-match
            |- [vci-string] --*vci-string (256)
            |- [exclude-range] --*id (0,4294967295)
                               |- start-ip
                               +- end-ip
            +- [reserved-address] --*id (0,4294967295)
                                  |- ip
                                  |- mac
                                  |- action
                                  +- description

Note: After FortiOS version 6.4 and later the above command will not work. Use the following command:

tree system dhcp server

Note: For an expanded output to show the entire FortiGate command tree structure in the same output file, use the 'tree' command from the main CLI prompt (the first few lines of the output are below as an example):

tree

-- -- system |- [datasource] --*name (35)
+- type (0,4294967295)
|- <global> -- language
|- gui-ipv6
|- gui-replacement-message-groups
|- gui-local-out
|- gui-certificates
|- gui-custom-language
|- gui-wireless-opensecurity
|- gui-app-detection-sdwan
|- gui-display-hostname
|- gui-fortigate-cloud-sandbox
|- gui-firmware-upgrade-warning
|- gui-allow-default-hostname
|- gui-forticare-registration-setup-warning
|- gui-workflow-management
|- gui-cdn-usage
|- admin-https-ssl-versions
|- admin-https-ssl-ciphersuites
|- admin-https-ssl-banned-ciphers
|- admintimeout (1,480)
|- admin-console-timeout (15,300)
|- ssd-trim-freq
|- ssd-trim-hour (0,23)
|- ssd-trim-min (0,60)
|- ssd-trim-weekday
|- ssd-trim-date (1,31)
|- admin-concurrent
|- admin-lockout-threshold (1,10)
|- admin-lockout-duration (1,2147483647)
|- refresh (0,4294967295)
|- interval (0,4294967295)
|- failtime (0,4294967295)
|- daily-restart
|- restart-time
|- wad-restart-mode
|- wad-restart-start-time
|- wad-restart-end-time
|- radius-port (1,65535)
|- admin-login-max (1,100)
|- remoteauthtimeout (1,300)
|- ldapconntimeout (1,300000)
|- batch-cmdb
|- multi-factor-authentication
|- ssl-min-proto-version
|- autorun-log-fsck
|- timezone
|- traffic-priority
|- traffic-priority-level
|- anti-replay
|- send-pmtu-icmp
|- honor-df
|- pmtu-discovery
|- revision-image-auto-backup
|- revision-backup-on-logout
|- management-vdom (31)
|- hostname (35)
|- alias (35)
|- strong-crypto
|- ssl-static-key-ciphers

FortiGate

Thought Leadership Security Summit. Outpace New Threats with AI - enhanced defense. Tuesday, Septmeber 15, 8:30 AM - 2:30 PM PT. The Golf Club at Newcastle, WA.

Virtual event | September 2026. SASE summit. The age of autonomous trust. Register here!