How to run a QOS rule for video transmission from an NVR? I added
"Traffic Shapers" for 100 kbps and "Traffic Shaping Policies" for ALL
TCP/UDP 1-65535 and when copying files, the rule limits the bandwidth,
but when playing video (Hikvision iVMS prog...
Hi. I have two subnets 172.20.25.x and 192.168.48.x managed by the same
FortiGate 60F firewall. I created two subnets in Policy & Objects ->
Addresses and rules in Firewall Policy but there is still no
communication between the subnets. What am I doi...
I think I know what the problem is. The host belongs to two policies.
The first one for the entire network allows full bandwidth. The second
one only for 1 PC has bandwidth division. How to set a higher priority
for the other one?
Hi @msanjaypadma , And Interface configuration in FortiGate firewall,
don't have this network [192.168.48.0/24] as directly connected.I don't
understand. Do you mean "Network->Interfaces"? I don't have a network
set there [192.168.48.0/24] Could you ...
FG # get router info routing-table details 192.168.48.0 Routing table
for VRF=0 Routing entry for 192.168.48.0/24 Known via "static", distance
10, metric 0, best * directly connected, internal Thank you for your
help. After adding the reverse static ...
FG # show sys interface internal config system interface edit "internal"
set vdom "root" set ip 172.20.25.177 255.255.255.0 set allowaccess ping
https set type hard-switch set stp enable set device-identification
enable set monitor-bandwidth enable s...
