We have a current SD WAN setup with LAN internet connectivity traffics
load balanced to 2 ISP providers - both WAN interface IPs are used and
the bandwidths are combined.192.168.0.0/24 --> ISP-A-50Mb (1.1.1.1/29) +
ISP-B-50Mb (2.2.2.1/29)Both IPs are...
What do you see in the SD-WAN Zones configuration on your FGT in terms
of bw utilization on each link? It manages to have a balance load. This
is in the actual infra using the first scenario sdwan config - boxed
usage when did the speedtest: Each lin...
With the current setup:192.168.0.0/24 --> ISP-A-50Mb (1.1.1.1/29) +
ISP-B-50Mb (2.2.2.1/29)Both IPs are usedIn a single device, when check
for public IP : for instance, ipchicken see 1.1.1.1 and ipcow see
2.2.2.1Bandwidths are combined to 100MbpsWhen...
Actually that is the attempt I made:Assign each links into separated
zoneSelected those zones as the outgoingSelected 1.1.1.2 and 2.2.2.2 as
dynamic poolsYes by doing this, I got the LAN users to establish
connection while utilizing that IPs. Unfortu...
