Dear Sir, What is causing Meru Controller 8.5 Build 6 runs primary
channel and operating channel in two different channels. For example, my
Meru 832i is running Primary Channel to be 116 and Operating Channel is
to be 161. Another example, Primary ch...
Dear Sir, This is AP832i with MC3200 controller code version 8.5 Build 6
and what is causing this I see when get Access Point logs after
connecting to connect ap id and issued system getlog command? If you
have any input, much appreciated.[5097549.64...
Dear Sir, I got AP320is and seeing the following when connect ap id and
the access point. Code Version is 7.8 What is causing this? If you have
an answer, appreciate it. [3293697.800678] Function
:stadb_clear_active_bssid ni = bc:3f:4e:67:42:0fFuncti...
Dear Sir, Patch is available for 8.4.2 and there is a 7iStep patch and I
am looking Meru version 8.5 Build 6 7i Step patch so I do not have to
step down. Thank YouYours faithfully,CHAMI
Dear Sir, Link was expired, can you please repost that
meru-8.5-3build-5-MC1550-rpm.tar.fwlcPassword:
FV8s3BBvhttps://fortinet.egnyte.com/dl/LwoLyhdXtlThank youYours
faithfully,Chamila
Beep keeps coming from if one power supply that you do not have power
cable plugged in or due to failure. There is a small red button in the
back right chassis next to the power supply chassis you will find to
press it to silence the
beep.-----------...
