I've bought a fortigate 60D, two fortiap 28C's and one 321C. I like to
use multiple wireless and wired devices in one LAN. Wired on the
Fortigate, but also wired on the 28C's. I've tryed several setup's
(hardware switch, software switch), (tunnel to ...
Thank you Eric. This was therefor the problem. I've upgraded the
Firmware to 5.0.10 and now the ethernet ports are working. Not very
stable, the connection is loose sometimes whil eth ewireless is doing
well, but it's a lot more then before.
Thank you Eric for sharing this information. Basic there are three
options for the lanports. I've tryed them all, but my NIC do not receive
any IP-number. Please let me share my configuration with you to see if
there is any wrong setting. All the wir...
Thank you very much for your anwser, John. If i'm using tunnels, also my
favorit and i've configured it now, how can i use the wired ports on the
FAP28C's? I've already set the port in the foritAp profile to 'tunnel to
SSID' but i can't connect to an...