You are leaving our website

Coldfirex · 02-25-2014

Howdy, We are unable to get ahold of anyone in sales (or our rep at the moment) that can explain this to us so far so I was hoping someone here could help quickly. I understand what ATP is, but I am wondering if we *lose* anything if we go with a NGF...

Coldfirex · 04-23-2013

Howdy, We have seen an issue at least 2-3 times where a VIP seems to stop working. The most recent one in question was to a linux box via SSH. The connection just completely stops working. The only way to fix the issue, besides maybe rebooting, is to...

Coldfirex · 09-25-2012

Howdy! Is there a way that I can end a session based on the source IP? 4.2.13 Thanks!

Coldfirex · 03-20-2012

I doubt this is possible, but can a Fortigate connect to a Cisco endpoint configured for Easy VPN? I currently have a client with an EOL Cisco router doing this to one of their vendors and they are telling me they only support Cisco Easy VPN and wont...

Coldfirex · 02-24-2012

Howdy, We are noticing an issue where a FGT80C is handling DHCP and we are handing out Option 66 and 67. Option 67 is handed out correctly, but the wrong IP address is handed out on option 66. No matter what Ip we use (converted to hex) the client al...

Coldfirex · 02-25-2014

Perfect, thanks!

Coldfirex · 08-27-2013

FYI, we are troubleshooting this issue as well for a couple Windows 8 clients. Their FGT is running 4.3.14. We have tried the latest v5 vpn client, as well as an interim release (yesterday) that did not help. One one machine we even reloaded it from ...

Coldfirex · 05-06-2013

Had this happen again. :( I ran a packet diag sniff and found that no packets were recorded for some reason. As soon as I changed a setting in the VIP, saved, changed back, saved, it started working again and I saw traffic being flagged by the sniffe...

Coldfirex · 04-23-2013

No load balancing here. set extip 208.1.1.1 (<- IP changed obviously) set extintf " wan1" set portforward enable set mappedip 192.168.251.1 set extport 22 set mappedport 22 I did not run the diag sniffer unfortunately due to the client being on the p...

Coldfirex · 04-23-2013

Do you mean like a session ttl? If so, I dont have any set for the SSH VIP (other than what might be a system default). The way we tell is when a client starts complaining. :( When its down we can try to connect from a different location and it does ...

User Statistics

User Activity

NGFW + ATP vs UTM Bundle

Virtual IP stops working

How to end a session based on source IP?

Cisco Easy VPN

DHCP Option 66 issue

RE: NGFW + ATP vs UTM Bundle

RE: FortiClient Immediate Disconnects

RE: Virtual IP stops working

RE: Virtual IP stops working

RE: Virtual IP stops working