Hey! i want to configure a policy based vpn with two wan dsl uplinks.
Wan port2 should be used for all the outgoing traffic like www, smtp,
etc and wan port 1 should be used for the vpn tunnel. But in case of
failure of one wan port, everything shoul...
Hi, i use the REST Command for a FTP connection and get the following
error msg: 502 Command REST not allowed by policy. I create a
Firewallpolicy but this rule doesn´t work: config firewall policy edit
34 set srcintf " internal1" set dstintf " wan1...
Hi, my brand new FG200A active-active cluster doesn´t update the widget
" Log and Archive Statistics" . Why? In my testing phase i didn´t
notice that. How can i fix this? Cheers
Hi, i want try to create an IPsec VPN with GRE and OSPF. In the VPN
manual an example for the CLI is given. Indeed, I have problems with the
command " set encapsulation transport-mode" . This command does not
exist on my Fortigate. How can I change t...
Hello, I have a very specific problem. I have to limit the incoming
connections to a server behind a Fortigate 200A. Any source IP (from the
Internet) should be limited to 50 connections per second to Port 80
(Soap) on our server behind the Fortigate...
Hi! Ok, ok guys, there is no question about your skills. ;) I would talk
with my CTO again and try to persuade him to do this with route based
VPN... Cheers
Hey, i can redefine it, but it' s not my preferred option... i' d rather
want to do this with policy based VPN, because of the problems with
route based VPN in the past. Let me explane... at first we used route
based VPN, but then we had the problem,...
Hi, okay, so the only chance i have is to create this senario with
routing based VPN? I have to check this but i think we had some Problems
with routing based VPN in the past. Greetings
Hi, i solved this Problem: config firewall policy edit 34 set srcintf "
internal1" set dstintf " wan1" set srcaddr " Mietserver5" set dstaddr "
Euronics FTP" set action accept set utm-status enable set schedule "
always" set service " FTP Group" set ...
Hi, if utm is disabled, the unfiltered profiles aren´t available. I can
disable the utm profile but the error also exist. Here my Profile: show
antivirus profile unfiltered config antivirus profile edit " unfiltered"
next end What do you mean with P...
