Good Morning, I'm stumbling over a problem I cannot solve. Probably just
missing something. I cannot get the second VPN up and running on my
fortigate 50E in HA (Active/Standby) mode with 5.6.2 Here's the setting:
I do have two separate ISPs. Both gi...
Hi everybody, being new to Fortigate systems (since last Thursday) I was
setting up the firewall to just pass or deny IP-traffic from or to
several interfaces. For most of the traffic that works well but SIP
doesn't follow the rule. I see incoming SI...
Yes, can confirm that.Both external IPs are reachable and accessible.
THIS is not the problem.That is the problem I'm having. In theory it
should work but thefirewall always give me error 101 when trying to
establish a VPNconnection to one of the spe...
Sorry,didn't answer the question.1. I do not use SD WAN2. I use RPF in
non strict mode (default) and asymmetric routing enabledMathiasOn
01.03.2018 08:17, Michael Bazy via Firewall: wrote:>> I really looks
like you configure distances and not priorit...
Hi,I tried both! And yes, one should think so but eitehr I did
somethingwrong (very good chance for that) or the system did not read
it'smanual... Currently the settings are: edit "wan1" set vdom "root"
set mode pppoe set distance 10 set allowaccess ...
Hithank you for that idea.Unfortunately it does not work. Result is
always:ike 0:Androids:375045: could not send
IKEPacket(ident_r1send):213.188.106.86:500->49.195.122.59:2191,
len=188:error 101:Network is unreachableWhen I change the priorities of
t...
Hi again, it seems that a reboot solved the ALG problem. Oh my... But
the opther two questions still remain. OS-Version is 5.4. Perhaps I
should explain a bit more detailed: I do have two ISP connections which
currently end on one router forming a si...
