Similar to this thread : https://forum.fortinet.com/tm.aspx?m=167064 Our
setup : 2xFG200E, A-P Cluster, v5.6.6All VoIP/SIP/RTP Engines is
disabled (as faar as we know how) asconfig system settings set
sip-helper disable set sip-nat-trace disable set ...
Hi CPU issue since Sunday on a FGT200B A-P Cluster.No config changes
before the issue hit us.CPU is near 100% at allt time.No visible
processes (diag sys top-summary) uses the CPU, it´s the system itself
that´s high! After reboot, the we get the issu...
Hi I have a cluster that seams to works OK, but still i get these
messages; ---------------------------------------------------- Message
meets Alert condition The following critical firewall event was
detected: Critical Event. date=2011-09-01 time=14...
Hi We have an 200E 5.6.6 with similar problems. The build in
VoIP/SIP/RTP engines is disabled just about the same as you have
disabled it. Incoming RTP Stream is cutoff for a small percentage of our
calls.Sometimes it can start working again during t...
FYI:Support hasn´t called back or responded in ticket in 24h, makes me
wounder a little about what we pay for...Tried to call again today.
Firstline got me to Secondline .Secondline checking all the obvious
stuff again and promised thirdline would co...
Hi We have the same issue since Sunday on a FGT200B A-P Cluster.CPU is
near 100% at allt time.No visible processes (diag sys top-summary) uses
the CPU, it´s "system" that´s high After reboot, the we get the issue
after 2-4 hours.We have removed all U...
I found out that VLAN tagged interface was not accelerated in HW. After
a big fight with First Line support i got hold of second Line It then
got reported as a bug a few months ago, and yesterday i was informed
good news; " A fix has been developed f...
