All, Recently purchased a Fortigate 30E to replace my old linux
iptablesand linksys ap. 30E firmware: v6.0.4 build0231 (GA)UBNT
Firmware: 4.0.21.9965 When I enabled DHCP for lan on 30e, the wired side
is fine.The Access point is a UBNT UAP-AC-Pro-Gen...
Here's an update. Below is the output from a capture from the UNIFI AP.
The packet is traversing the network correctly and out the AP. However,
the client is not accepting the IP offered via the fortinetover Wifi, it
is accepting the IP via the links...
