Hello,Currently have Merkai AP's that route clients on VLAN1001 to the
Gate. Subnet is 172.16.2.X. This interface sits in a DMZ, so I made a
policy: From>DMZ, To>Inside, Source>VLAN1001, Destination>
VLANx(Internal Servers), Service>ALL, NAT>EnabledI...
Hello Aashiq, thank you for your reply!I have gone ahead and confirmed
the following:The firewall policy does allow ALL services (double
checked the policy). I just noticed that in the policy, NAT was
unchecked. I went fixed that policy, enabled what...
