So the vpn connects fine but there seems to be some issue with routing
or something since i cannot get to any network behind my Fortigate 60E
(which is the firewall I'm using for this). ipconfig on windows:
Ethernet adapter Ethernet 4:Connection-spec...
Trying to bring up VPN from the forticlient on my phone to the firewall
which is on version 7.2.0. Phase 1 shows success and thats it.Logs
below, shows timeout so no idea whats happening: ike 0: comes
172.x.x.x:26655->173.x.x.x:500,ifindex=5,vrf=0......
So i use this firewall for my homelab and tried to establish ipsec
remote vpn from my phone to the fortigate but it stops at phase 1, i
looked at the logs but cant make out whats wrong: Logs below: ike 0:
comes 172.x.x.x:26655->173.x.x.x:500,ifindex=...
So i enabled split tunneling and included 192.168.10.0/24 and
192.168.20.0/24 as the accessible networks however i still cannot get to
these networks: Active Routes:Network Destination Netmask Gateway
Interface Metric0.0.0.0 0.0.0.0 192.168.27.104 19...
here are the route details, like you siad there are 2 default routes: PS
C:\Users\kxxxx> route
print===========================================================================Interface
List12...00 09 0f fe 00 01 ......Fortinet Virtual Ethernet Adapte...
yes split tunneling is not enabled, i would like to get this to work
without enabling split tunneling. i will share the routing client
routing table later today. Should be "route print" for windows right?
