Description This article describes how to change the BIOS Security Level
on FortiGate 50G series. Scope FortiGate 50G series. Solution On most
FortiGate Appliances, to change the BIOS security level and allow to
install unsigned Firmware Images, it i...
Description This article indicates a FortiGate compatibility issue with
Hirschmann Switches. Scope FortiGate SoC4 Platforms. Solution FortiGate
SoC4 Platforms may experience packet loss when connected to Hirschmann
Switches. This is because SOC4 does...
Description This article describes a condition that may occur in a
Security Fabric Setup, where an Automation Stitch may loop multiple
times. For the demonstration, this Automation Stitch is configured:
config system automation-stitch edit "new-backu...
Description This article describes how at the time of writing this
document, the Backup of configuration file from CLI using FTP is not
fully SD-WAN aware, and may cause connectivity issues for self-generated
traffic. Scope FortiOS. Solution FortiOS ...
Description This article describes, that In a Security Fabric, when
using an Automation Stich to perform backups over FTP/TFTP/SFTP, the
network administrator might run into an issue, where the backups
performed do not have a unique name, and therefo...
