Description This article describes OSPF with IPsec VPN for
redundancy.Scope For version 6.4.3.Solution This is a sample
configuration of using OSPF with IPsec VPN to set up network redundancy.
Route selection is based on OSPF cost calculation. Config...
DescriptionThis article describes the configuration of UDP hole Punching
for spokes.ScopeFor version 6.4.3.SolutionUDP hole punching allows ADVPN
shortcuts to be established through a UDP hole on a NAT unit. The NAT
unit has to support RFC 4787 Endpo...
DescriptionThis article describes the configuration ADVPN with
RIP.ScopeFor version 6.4.3.SolutionThis is a sample configuration of
ADVPN with RIP as routing protocol. The following options has to be
enabled for this configuration:1) On the hub Forti...
Description This article describes the configuration ADVPN with
OSPF.Scope For version 6.4.3, and version 7.0.1+.Solution This is a
sample configuration of ADVPN with OSPF as the routing protocol. The
following options have to be enabled for this con...
Description This article describes how to configure ADVPN with BGP.Scope
FortiGate v6.4.3 and v7.0.1+.Solution Below is an example configuration
of ADVPN with BGP as the routing protocol. The following options must be
enabled for this configuration: ...