Hi all, Since this morning I have a weird problem :( Some users complain
that they can't surf from LAN to Internet. I found the problem : my
default gateway is 192.168.0.254 (MAC : 00:09:0F:09:00:02) but when I
type in a MSDOS the arp -a command, I s...
Hi All, My Forti product is a FortiWifi 60C (v4.0,build0656,130211 (MR3
Patch 12)). Just one vdom (root). I have 2 software switchs : -
switch_data from interna1 to internal5 ; - switch_wan from wan1 to wan2.
On each interface : - internal1 : device ...
Hi All, No, I didn't compare the 2 configurations and I didn't open a
ticket with the TAC because the issues were fixed when I copied line by
line the configuration.Actually we work with v5.4.0 without any problem
;) Regards, Jacques
Before read your last post, I disabled devices identification = NOKI
downgraded in v5.2.2 = NOKThen I upgraded again in v5.2.3 = new problem,
no route between the different interfaces works. So, after a factory
reset, I restore the last conf = NOKThe...
:) Yes I'm sure.Furthermore, the IP address is not the same (2
différents subnets).The FortiGate is online since one month without any
problem, this one appears now neither why nor how. I tried to downgrade
in v5.2.2build642, the problem is the same.
Bonsoir Tom, In CLI mode, try this : conf global conf system interface
show Then see if for some interface command " set allowaccess" is set.
If yes, then " set allowaccess" lists the way for accessing to the Forti
product. If not, you can type : con...
