Hello, I' ve tried my hardest to get this up and running but I' m not
sure what I' m doing wrong so now I' ve come for help. Recently upgraded
from Juniper NS5GT in our main office to a FortiGate 80C. Have a really
small remote office with 2 users th...
Coldfirex, Not meaning to hi-jack your thread but I' m having almost a
similar issue and was wondering if you could provide more detail. I' m
trying to setup a *nix based imaging solution and options 66 & 67 are to
be set in the DHCP server. As far a...
Alright, I had some time today to set at this for a minute and actually
got it to work. First, I removed the VPN entirely from the DLINK DIR-330
and let it reboot. I then removed the connection from the fortigate and
run the command suggested by ede_...
Thanks everyone for the info. I will go ahead and give this a shot this
weekend and let you know how it goes. Again, thanks for the load of
info..very very helpful! -Amor
Thank you both for the replies. In regards to 4.0 MR3, besides
downloading and putting on the MR2 firmware I' m guessing that would
entail taking the entire system down and doing reconfigurations? I won'
t be able to import a current MR3 config into ...
