Hi All. Question.We have dual WAN links WAN1 and WAN2. All our
webservers are using WAN1 addresses which are then translated through
VIP. However if WAN1 goes down how can WAN2 act as the new link for the
webservers/email etc. I can get our ISPs to r...
Hi,In a failover pair can I use different SFP modules.Primary - Port 23
10GB SFPSecondary - Port 23 1GB SFP Our backup internet connection is a
different speed from the primary connection. regards,Chris.
Hi there,Did you get an answer to the above. We have the same sort of
setup, 2x HA Fortigates. I want to implement SDWAN and also will need
something like BGP for the return traffic. Chris.
HI Adbel, Thanks for the info. However it is a bit more complicated than
that. I kept it simple for the initail post. We have around 150 public
IPs we need to use. WAN1 is a /24 address, unfortunately WAN2 is a /30
so that presents a problem. (I inhe...
Hi Lobstercreed, Thanks for you comments, perhaps I didnt explain very
well. We have a failover pair, with two internet connections. On the
primary port 23 with 10GB SFP is primary internet connection with 10GB
ISP (via a switch) On the primary port ...
