Hi, We recently upgraded to 4.3.5 from 4.2.8 as we wanted to take
advantage of two factor authentication that was available in MR3. I have
users configured in the User section with the option to match user on
radius server for authentication against ...
Hi, Not sure if this is the right section to post as the VPN in question
is actually up and passing traffic successfully. But maybe the problem i
am having is related to how i' ve set it up so here goes. As is say,
Site to site IPsec VPN (Interface m...
Hi All, We currently use SSL VPN with Radius authentication. We now have
a requirement for Two factor authentication and we' re wanting to use
Client certificates. I can see an option in the SSL config for " Request
client Certificate" but I' n not o...
I cant imagine it being a feature as it is a bit of a security risk
allowing a user to (Either intentionally or Accidentally) bypass the
need for their Fortitoken code. The only way I have been able to get
around it is by creating local accounts for ...
Thanks for the quick reply. I thought as much to be honest, we have a
/27 subnet from our ISP so thought it would be straightforward to use
one of the other IP address' s other than the main interface ip for the
VPN. Regarding the monitoring, we alre...
Will do, I' ve double checked all the certificate settings and they all
seem to be correct as per the documentation. I' ve opened a ticket with
Fortinet to see if they can help. Will let you know how I get on. Thanks
for the help. Chris
The certificates are readable using the method you posted so I guess i
can rule them out :-) NTP is configured but thanks for the tip. RADIUS
is the current way we authenticate but we need to use two-factor so once
i have certificates working we will...
