I keep getting ff. error in my event log every few seconds. The router
seems to work fine otherwise. How do i trace the source of the problem
and block it? Help is very much appreciated. Will this error have effect
on performance in future, will the ...
I dont just a windows server on the internal interface doubling as DNS
which was set as the secondary DNS for DHCP clients So you are saying
that i have incorrectly configured clients on IPv6 they query opendns it
returns AAA record then it blackhole...
hi emnoc There was no specifics in the log no IP no cause for error just
a generic NAT port is exhausted message over and over again Here are my
router stats get system performance status CPU states: 0% user 4% system
0% nice 96% idle Memory states: ...
Guys thank you for your replies. I finally found the cost but the
question is why? It turns out the source of problem is a DNS entry
primary DNS points used to point to ISP DNS and secondary to windows
server for file sharing Now i recall changing th...
The router was kind of slow before until i turned off all service to
interface https ping etc. You think it might be under attack? Another
person suggested it could be the LAN side broadcasting, it has at least
3 subnets of the form 192.168.x.yy behi...
hi emnoc This is my output misc info: session_count=9937 exp_count=0
clash=8014 memory_tension_drop=0 ephemeral=1391/32768 removeable=8544
doesnt look like an ephemeral problem Im not sure how to determine the
source of NAT port exhaustion? Awhile ag...
