Hi all, I have a FGT200 v.280 build 489 with a VPN connection set up
with a Cisco PIX on the other side. Tunnel is up and work, but if an
application is inactive for a while, connection drops (in the remote
side appear: " other side has closed the co...
Hi Marcelo, AV Engine update is made through GUI as a manual AV
definition update (System->Config->Fortiguard->Av Definition
Update)where a ".pkg" file must be uploaded.The .pkg file may vary by
FortiOS version and model. As the use of incorrect file...
Currently I'm testing the solution suggested by the techical assistence
via ticket.The problem after 7hours seem solved but I 'll wait tomorrow
to be 100% sure. The problem was not a FortiOS bug, but the AV engine
corrupted, it seemed not related to ...
In my scenario this didn't solved the problem: 2 FGT80C in cluster:-
backed up configs- format boot- upload FW image via TFTP- format log
disk- restore config from backup- recheck gui configs (AV logs won't
appear until you force them via cli command...
I have the same problem with 80C FortiOs 5.2.2Many legitimate mails
blocked as false positives with unknown virus.Had to switch AV profile
to monitor until Assistance will reply to my ticket (submitted Dec, 15th
and no answer yet)inspection-mode is p...
question: using the above example, is there supposed to be whitespace
between the first forward slash and the c? I used the above example,
only I removed the white space. Only, now it picks up on the word "
specialist" ... if I put the whitespace bac...
