Hi all, I need urgent assistance. We've had a site to site tunnel a
while configured with a client. Our end was using a Fortigate 600C
firmware 5.4.4 and they were using ASA 5520 series.In this setup
everything worked fine. We've recently replaced ou...
Dear fortiweb users, We've just purchased a fortiweb to host our
services. I've noticed that fortiweb is able to rewrite url. So right
now we're hosting a url
[link]http://domain.com:8085/oracle/f?p=13[/link] and would like to
change it to [link]http...
Hi michael, We had the same situation in our company where we also
migrated from asa to fortigate. You can use any interface in both the
inbound and the outbound. This all depends on which traffic you're
eventually allowing through in the source and ...
i'm running version 6.03 and was hoping they would add this feature.
Most high end firewall end up being configured in vDom mode, so i still
don't understand they're approach on the security fabric.
Hi Jay, Do you mean downgrade firmware from stock firmware? If that's
the case then yes, you can upload a lower version via gui (status->
Update firmware). Afterwards go to Maintenance -> backup & restore and
choose the boot firmware. Hope this helps...
In our company we use firstname.lastname as credentials. When using "CN"
in the Common Name Identifier field, the users authenticate with
firstname lastname. Instead of the "." they have to use a space.
Changing this to "sAMAccountName" in the Common...
