Hello all, Is there anyway to enable dead gateway detection on an ipsec
interface? Everytmie I add one, it immediately makes the ipsec interface
inactive. Maybe there' s a setting that I missed to let the ipsec
interfaces ping out? Many thanks for an...
Hello all, 60c, 5.0.1: When both of my WANs have static IP' s, and I
unplug one of the WAN cables, running this cli command (get router info
routing-table database) still shows both WAN routes, but one WAN is
marked inactive. This causes trouble for ...
Hi all, I have a 2 wan connection 60c, running 5.0.1. I want to create 2
IPSec VPN connections in interface mode, but need help understanding the
concept of a redundant VPN vs a backup VPN. As I understand it, I can
create 2 IPSec tunnels for redunda...
Quick update, I believe we solved the problem, or at least my problem. I
haven't fulled vetted this out yet, but so far, so good. All of my
static URL Web Filters end with:* wildcard block I changed it to:[^.]
regex block and now everything works as ...
Quick update, I believe we solved the problem, or at least my problem. I
haven't fulled vetted this out yet, but so far, so good. All of my
static URL Web Filters end with:* wildcard block I changed it to:[^.]
regex block and now everything works as ...
Hi all, I've been following this thread since the beginning. I have 15
locations, each with a fortigate 60E or 90D. I use URL filtering
exclusively. Accessing Gmail on Chrome is a problem on 6.0.6 all the way
up to current 6.2.3. I have tested this i...
I just re-read the kb on the command " con sys int" to see how the
interface changes from static to dhcp on the interfaces. I was hoping
there was a setting that could solve all this, but for the most part,
they were the exact same. Same issue in v4....
I probably could switch over to dynamic IPs on my WANs - I think I pay a
few extra $$ per month to have them. But, I also have to use opendns,
and from what I understand, then need a static IP to work. Plus, I' d
really like to figure this out, as it...