Technical Tip: Exempting IP addresses from IPS sen...

gpap_FTNT · 06-21-2022

Description This article describes how to restore HA Heath-status. Scope FortiGate v6.2 and above. Solution In the FGCP HA cluster after removing a peer, an error will be received upon checking the HA status: get system ha status Primary selected usi...

gpap_FTNT · 06-13-2022

Description The article provides some information regarding the command 'system speed-test-server'. Scope FortiGate v6.2 and above. Solution Users should be aware that they are not able to config custom servers under: # config system speed-test-serve...

gpap_FTNT · 05-31-2022

Description The article describes how to test an automation stitch configured for event log. Scope FortiGate. Solution When an automation-stich is configured for event log, in GUI the test is grey and not able to be used. For example for a stich th...

gpap_FTNT · 04-18-2022

Description This article describes how to test the anti-spam engine on phishing URL. Scope FortiGate. Solution Assuming that an email-filter is already configured, use the FortiGuard to get a testing URL : https://www.fortiguard.com/webfilter/categor...

gpap_FTNT · 02-23-2021

Description This article explains troubleshooting steps for cases where FortiGate cannot connect to FortiGuard servers and does not have direct access to the internet. Scope FortiGate. Solution Enable debug commands by running the following: diagnose...

User Statistics

User Activity

Technical Tip: How to restore HA Health-status

Technical Tip: Info about build-in speed-test-server

Technical Tip: Automation stitch test related to event log

Technical Tip : How to test anti-spam engine on phishing URL.

Technical Tip: Failed to contact FortiGuard servers due to unknown CA

Technical Tip: Exempting IP addresses from IPS sen...

Technical Tip: Failed to contact FortiGuard server...

Technical Tip: Change from NAT to transparent mode...

KCS