Hi, I am experiencing traffic loss from the interfaces (vlan
subinterfaces) . For example I have Interface vlan3333 and vlan 3334 in
the same parent interface (port8) in Fortigate VM. As soon as traffic
flows from vlan3333 to vlan3334 I am encounteri...
Hi Guys, I have a strange issue regarding SSL VPN with full tunnel. I
had the problem in 5.4.1, I've downgraded to 5.2.8, the same issue. When
connecting to SSL VPN(just from a single user), the whole traffic for
that VDOM went dead, the Fortigate st...
Hi, I have a strange situation. I have to implement webfilter to a
client and he wants to inspect HTTPS traffic as well. The problem is
that once the web filter is applied to HTTPS as well the client' s
mail(the use office365) and Lync doesn' t work,...
Hi, I have an issue. I am trying to connect one FGT to a pptp server.
The unit connects to the server, it adds a route ex. 10.0.0.60/32(the
server address) and a route with 10.0.0.64/32(the FGT addess) connected
via ppp1 How can I add a route for the...
Hi, if the subnets are different it will work and the traffic will be
routed through the Fortigate, however in this case it will not. It is
basic rule of networking. If the addresses are in the same subnet the
traffic will flow between the hosts dire...
this is configured in global config global config system ha set
vcluster2 enable set override enable config secondary-vcluster set
override enable set vdom " VdomB" end end
Hi, You can have multiple clusters in HA. If you have for example, VdomA
and VdomB you can create 2 VirtualClusters, first master for vdomA and
second master for VdomB config system ha set vcluster2 enable set
override enable config secondary-vcluste...
