Hello I see your configuration as follows. Whereas port1 and port2 IP
address of different subnet. Client1 (trying to access 2.2.2.2) ====>
ISP1 (BGP) ===> FGT (BGP) port1 (VIP-2.2.2.2) ===> FGT (NAT-10.10.10.10)
Client2 (trying to access 2.2.2.2) ==...
Hello, In this case I suggest you register a VIP for each interface are
able to aggregate in a VIP group or not, and register the rules of its
purpose. In which case the zone will only make the organization the VIP
registration in the rules. Hope thi...
Hello. By default the FortiGate internal interface uses the VLAN ID 1
untagged; However must have entered into conflict with the VLAN 1 the
network 192.168.20.0/24 the switch 3com, for in the FortiGate you
reported that created the VLAN20 for the net...
Paul, Yes, but in this case with windows XP FortiClient SSLVPN only work
with SSL2, SSL3 or TLS 1.0; Follow windows 7 supported screen without
these options in active FortiClient SSLVPN connects not using TLS 1.1
and 1.2; Hope this helps
Paul, Windows XP with Internet Explorer 8.0 not support TLS 1.1 and 1.2
. only Windows 7 and higher support. Validate Control Panel> Internet
Options> Advanced, because you will not find support TLS 1.1 and TLS 1.2
on Windows XP stations. Hope this h...
