The interface got a overhaul, looks bit more crisp, a welcome change.I
briefly tested it in the lab, but is anybody running 4.3.0 in production
yet? What are the experiences?
Hi, I'm trying to setup a FortiGate 51E at home on a vdsl-Line with
dual-stack IPv4/IPv6. The dsl-modem is in PPPoE passthrough mode
(bridge), ISP is Proximus (belgium). The wan interface is in PPPOE mode
and receives it IPv4 address, so far so good....
Im not entirely sure we are facing the same problem. Turns out I
overlooked a tiny detail. Comparing your config with mine: Wan
interface: set dhcp6-prefix-hint 2001:XXX:XXXX:ed3f::/64 I have played
with the "set dhcp6-prefix-hint" before but it look...
Quick update, got it working. Please, pm/post your- lan & wan interface
config- ip received on host- ips assigned on your FG interfaces (ppp &
lan).
Andy Bailey wrote: I'm currently on 5.4.4 and have got to the point now
that I can see an IPv6 prexfix being delegated. I can setup delegated
subnets to internal ports and that seems to be working with internal
devices getting valid IPv6 addresses in...
Andy Bailey wrote:Bart, Was this something you were able to resolve?
I've with an ISP here in the UK with a similar configuration and
struggling to get it working. Like you, i can DHCP CP exchanges going
on, but dont seem to get any delegated prefix ...
