Hi, In the policy route configurations do not configure the gateway.
Leave the Gateway with an ip address 0.0.0.0. This would allow the
fortigate to remove the routing entry as soon as the DSL1 fails. Also
configure the PING server ( refer below link...
Hi, Since you are using the same distance & priority the ECMP would come
in to the picture. due to which the fortigate is trying to do a source
address based load balancing. So I would recommend you to change the
priority of the static routes. Hopefu...
Hi, For an incoming traffic to a specific VIP , Link aggregation would
not work. Link aggregation would help only in a LAN scenario not the
WAN. Link aggregation does not mean Bandwidth aggregation of Multiple
ISP. It is used to increase the Port Den...
