Been banging my head against this for two days. What I want to do is: 1.
Assign ports 1-20 to VLAN 10 2. Assign ports 21-34 to VLAN 20 3. Assign
ports 35 and 36 as layer 2 TRUNK ports ( so I can plug in an access
point or another switch if I need to)...
Can' t be done according to TAC. What i did to get around this was to
create two hardware switches instead of VLANs. Controlling access
through f/w policy. Then i created a software switch and added two VLAN'
s (with two different networks) for the a...
