I have a 60E that I am struggling with DHCP for a specific device.I have
created a ticket w/ Ubiquiti but thought I would drop some information
here for some assistance as well. I have a 60e + Cisco switch +
UAP-AC-ProVDOM configDHCP services running...
Have a case open but figured I'd try here as well. I have a few 60E's
deployed to field. I am experiencing a 'throttle' like behavior on the
WAN at 2 of my sites.Site A - Cox ISP - 5.6.6 code - WAN works as
expectedSite B - Cox ISP - 5.6.4 code - WAN...
Jim,Are you still having this issue? I am running UniFi WAP and have
similar behavior. I can set the port to access mode and it will pull
DHCP fine. I have created a ticket, did you ever get a resolution?
Closing a loop here - on one of the 60E (SiteC) the issue was ATT
gateway - Pace 5268 - DMZ+ mode ...known fw bug from ATT. Replaced w/
Arris BGW210. Speeds are great now. Still confused on the other site
(SiteB) - more to come there.
Working on this still - lots of testing - now pointing to ATT issue w/
DMZ+ mode on my modem. If I pull an internal IP on the FG from the ATT
Pace it performs fine. If I set DMZ+ on modem for FG perf drops thru the
floor....more to come.
Forgot to mention I'd done that - I checked and auto negotiation was
1000/Full, but manually set the WAN1 interface to 1000 and it still
exhibits same behavior. Thanks for the tip...I'm new to the platform so
this problem is definitely expanding my u...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
