Hi I've setup a local bridged wifi network using a Fortigate 60D and
FortiAP 321Cs. Everthing is working fine but Bonjour and other
Broadcast/Multicast traffic seems not to work for all wifi clients. My
vap settings are: vdom : root fast-roaming : en...
Hello I've managed to set a password (copy and paste) - maybe it was too
long - on a FortiAP 321C and now I'm not able to login again . I cannot
find a reset button or other procedures in the docs. While it is not
critical at them moment since the Fo...
Hi The documentation
(http://docs-legacy.fortinet.com/fos50hlp/50/index.html#page/FortiOS%25205.0%2520Help/wifi-ethernet_bridge.058.1.html)
names two different bridge operations:[ol]Bridge SSID to FortiGate wired
networkFortiAP local bridging (Privat...
Hi I own a Fortigate 60D and I think about to add 3 FortiAPs. Since the
60D has only 175 Mbps CAPWAP throughput (roughly 21MB/s) its not an
option to tunnel the traffic. Nevertheless I would like to setup a guest
network with a tunnel mode to isolate...
Hello everybody, Quite a strange problem. I wanted to upgrade the
firmware with FGT_60-v300-build0475-FORTINET.out. First I got the
message Image RSA signature is invalid. Do you want to continue to
upgrade ? When I click ok I get another strange mes...
I was able to solve the problem with the help of the Fortinet support.
config wireless-controller vap edit your-profile unset
broadcast-suppression end In my case I had to reboot the FortiAP that
broadcast message were forwarded to the WiFi network.
Ok, its quite simple: Above of the three led light and the label
FORTINET FortiAP 321C is a small hole. This is the "hidden" (because not
mentioned) reset button. Holding it down for 10 seconds while the
FortiAP was running has reset my configuration...
Hi Andrea I personaly would never use bridge if I do not have to use for
some reason but is my last option :) One example: if you want to add 3
FAPs to a 60D and a 60D has only 175 MBps (roughly 21 MB/s) CAPWAP
throughput I have the strong feeling th...
Thanks for your answers. I understand the difference between the tunnel
and the bridge approach. And I was aware of loosing all UTM
functionality in bridge mode. What I don't understood was why Fortinet
propose to create an interface on the Fortigate...
