Re: SNMP OID traffic in/out

SMFTNT · 10-31-2017

Hello David, In response to your post "SNMP OID traffic in/out" the OID referenced "1.3.6.1.4.1.12356.101.13.2.1.1.5" is defined as the "Network bandwidth usage of specified cluster member (kbps)" which is part of the fgHaStatsIndex Table listed as "...

SMFTNT · 03-01-2016

Hi Ashik, If you can gain telnet access to the FAP can you please run, "fap-get-status" and provide the output. I am curious as to what is the Branch point number. As well if the 10 sec reset is not working then hold the reset until the power LED fla...

SMFTNT · 03-01-2016

Hi Ashik, Thank you once again... 1. When the reset button is held the power LED should flash and the network LED will turn orange. Once the reset has completed the power LED will be green and the network LED will turn green. If the network LED fails...

SMFTNT · 03-01-2016

Hi Ashik, Thank you for the reply. 1. How is the unit powered? POE SW, POE Injector (Fortinet/3rdParty), Power Adapter? 2. At anytime does the "power" LED become green? As well does the "network" LED become green? 3. If the "network" LED is green att...

SMFTNT · 02-29-2016

Hello Ashik, In response to your questions please see the outlined below. 1. Build0475 would be a manufacturing build. 2. There is no console available on the FAP 221C model. One would have to run execute telnet from the FortiController. 3. A hard re...

User Statistics

User Activity

Re: SNMP OID traffic in/out

Re: FortiAP 221C Firmware Upgrade from V5.2 Build 475 to v5.2.5

Re: FortiAP 221C Firmware Upgrade from V5.2 Build 475 to v5.2.5

Re: FortiAP 221C Firmware Upgrade from V5.2 Build 475 to v5.2.5

Re: FortiAP 221C Firmware Upgrade from V5.2 Build 475 to v5.2.5

Re: SNMP OID traffic in/out

KCS