Re: FortiSwitch Access on FortiManager

krahemat_FTNT · 09-08-2025

Turn off Central Management for FortiSwitch in the ADOM of the FortiGate with the Switches. You will be able to make port changes through FortiManager's WebUI without needing to use the CLI. Any changes through the FortiSwitch CLI will be overwritten...

krahemat_FTNT · 09-08-2025

Have a look at this document as it may help you find the authentication issue: https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-SSL-VPN-Troubleshooting/ta-p/189542 The FNBAMD should tell you where you are failing in the debug. Hope thi...

krahemat_FTNT · 09-08-2025

I am not sure what you are trying to do. If you are trying to send VLANs through VTP like Cisco does with their LAN switches, then NO. Fortiswitches do not participate in Cisco proprietary VTP protocol. If you are trunking ports that is a different s...

krahemat_FTNT · 09-08-2025

Since the product has not been in support for many years, I doubt there would be solution to this. I am assuming the console settings are 9600, 8N1. The last firmware update for this product would have been around 6.x or even 6.0 for that matter. If ...

krahemat_FTNT · 09-08-2025

Michel, You have not stated if this is a virtual appliance or a hardware appliance. If this is a virtual appliance, then I would guess that other VMs in the host are sharing the resources with other VMs. Also is the storage locally attached or throug...

User Statistics

User Activity