Hi All i have 100D and work normally, but after i downgrade from 6.0 to
5.2, i found all the port not work but i can access CLI and check
hardware dialogic without any error, have any idea what problem? cannot
ping, access, i confirm allow ping and a...
G100D3G16804590 # show sys int config system interface edit "wan1" set
vdom "root" set mode dhcp set allowaccess ping fgfm set type physical
set role wan set snmp-index 1 next edit "dmz" set vdom "root" set ip
10.10.10.1 255.255.255.0 set allowaccess...
Sorry late reply, ping any host not work but ping itself it ok
FG100D3G16804590 # get system arp Address Age(min) Hardware Addr
InterfaceFG100D3G16804590 # diagnose ip address list
IP=10.10.10.1->10.10.10.1/255.255.255.0 index=6 devname=dmz
IP=192.16...
