I have a TP Link travel router with a (crappy) VPN client built in. I'm
trying to connect to my FGT 80 via IPSec. (all my other VPNs work fine)
It looks like Phase 1 completes, but I cannot find any indication or
idea why it doesn't complete Phase 2....
I feel like I've checked every guide, but not having success. I'm trying
to have DHCP via tunnel interface so I can assign a static IP to a user.
Users are connecting via native iOS client on iPhone/iPad. When I have
phase1 give out the IP, it works ...
edit "TPLink" set type dynamic set interface "wan1" set peertype any set
net-device disable set mode-cfg enable set ipv4-dns-server1 1.1.1.1 set
proposal aes128-sha512 aes128-sha256 aes128-sha1 set dpd on-idle set
dhgrp 14 5 2 set ipv4-start-ip 192.1...
Perhaps I'm mistaken that Phase1 completed. I don't see any errors and
the logs in the console say "IPsec SA installed" I don't see anything in
the logs which indicates why it's not completing.
That's the link the other user posted. No luck, as I'm not using a
Forticlient. The instructions say To configure DHCP server on the IPSEC
client interface. I posted my config above, is there something missing?
I feel like it is configured correctly....
