Hi,I can't get a reverse rule to trigger for VLAN communication. VLAN 30
is able to ping VLAN 100, but 100 can't ping 30. VLAN 30
Laptop[10.0.30.2] can ping 10.0.100.200, and 10.0.100.1, and
10.0.30.1VLAN 100 Laptop[10.0.100.200] can't ping 10.0.30.2...
Hi everyone,Fresh out of the box and upgraded, no previous Fortigate
here, so I am very green to this. Anyway, I have a rule from my LAN to
SD-WAN with Source and Destination "All" and I have ICMP, DNS, Web
Services, UDP 443, and Speedtest.net all al...
Just an FYI on the laptop 10.0.100.200, I had 3 Terminal Tabs, each
running persistent PINGs, first to 10.0.100.1, second 10.0.30.2, third
10.0.30.1. Tabs 1 & 3 ping fine, but nothing shows up when doing the
sniffer with just host 10.0.100.200 and us...
Here was the output...I had to remove the second host to get
anything:Firewall-201F # diag sniffer packet any "host 10.0.100.200 and
10.0.30.2 and icmp" 4 0 a interfaces=[any] filters=[host 10.0.100.200
and 10.0.30.2 and icmp] ^C 0 packets received b...
Nchandan,Thank you your method help clear up my confusion. I thought a
VLAN switch would encompass all the VLANs under it. It does not based
upon the lookups. I have to make rules for each VLAN, and there doesn't
appear to be a catch all like explici...
