Hello, I recently installed a second WAN on my FortiGate 40F. I've been
facing an issue I'm not able to resolve and looking for some help. I am
a beginner though, so I'll try my best to explain my goal clearly and
current Goal:- My wan1 has a bunch o...
Thank you so much! After enabling Port Forwarding (I set up a Virtual
Server and opened all ports one by one), I am now finally able to
receive traffic. I actually set it up as a DMZ to get all ports open to
the Fortigate.Now its another issue I'm en...
Yes, the public IP is getting resolved correctly. The DDNS is getting
the correct IP. When I sniff for packets "diagnose sniffer packet",
nothing is hitting the firewall... but all other static IPs and ports
from wan1 are getting traffic.. Not sure w...
Update: I got a static IP for my WAN2, but unfortunately, the ISP
doesn't allow bridge mode on the router. Therefore, I am stuck with
getting 192.168.118.1 as the router's IP, and an IP of 192.168.118.4 -
ie: I cannot set manual IP for the Interface....
Thank you so much @Mrinmoy @ap @Dhruvin_patel for your help. I think I
am 90% through, but I'm still missing something! Just keep in mind I
have an SD-WAN setup for 2 wans. Here's what I did: - Created DDNS for
my WAN2. I can confirm its working as I...
Thanks for your response. So that means outgoing traffic from the device
will have to be from WAN1 since the incoming came from WAN1. My only
solution is to purchase a static IP for WAN2 I guess?
