Hey, I have device profiling rules one is for APs and the others are for
Cameras and Printers with the Vendor OUI. When I plugged in an AP on
Switch FortiNAC tagging it to AP_Role but the others does not work
although it appears in the Hosts. Same co...
Hey, I configured dot1x on FortiNAC with these and trying with Aruba
AOS-CX Switch; (Winbind joined and Radius services running) When I try
to connect, I see logs with the correct username but FortiNAC does not
send reply packet. 10:38:54.579232 IP (...
Hey, we have VXLAN between DC and DR sites. We can access through the
same subnet, so we can ping or access to the GUI. On the different
subnets we can't access to the DR site FW with the HTTPs,PING or
something but we can access to the DC site FW GU...
Hey, We have 4 locations that we use Aruba APs and works well. Now we
have 1 more location and have 4 AP's in the location. AP02 is the VC
that assigned by Aruba Central and we cloned the working location's
configs in this location. After that, we cr...
Hey, we have 2930F Switches and working well with FortiNAC. On the other
hand, we have 6100s working on Aruba Central with these settings
(screenshots) on FortiNAC and working well too. So device profiling
rules and others are set. We put 4100 to the...
When I delete the RADIUS Req Attribute "EAP-Type-Name: PEAP" it worked.
But why? I need to check if Wireless or Wired after this test. And the
other thing is if I login with not valid user, FortiNAC does not push me
to Register VLAN. It assigns to VL...
When I delete Authentication Policy, now I can see the logs from Service
Log and FortiNAC sent access-accept but it says VLAN = 1 so not changing
to the correct VLAN. FortiNAC v9.4.7 btw. User belongs to the ITNS VLAN.
(62) Login OK: [COKYASAR\baris....
